Semi-synthetic oil with low-ash additives for clean low-smoke burning.

'Low-smoke oil' performance class:

JASO-FD, ISO-L-EGD.

Outstanding start capabilities,

Fuel/oil ratio: 50:1

. Particularly recommended for STIHL 4-MIX engines.

Fully synthetic oil with exceptional lubrication properties.

Burns with extremely low residue due to ash-free additive.

Suitable for continuous use under the most demanding engine conditions.

Performance class:

JASO-FB,

ISO-L-EGB

. Fuel/oil ratio 50:1.

Recommended for STIHL 4-MIX engines.

Semi-synthetic oil with low-ash additives for clean low-smoke burning.

'Low-smoke oil' performance class:

JASO-FD, ISO-L-EGD.

Fuel/oil ratio: 50:1.

Particularly recommended for STIHL 4-MIX engines.

Recommended for STIHL 4-MIX engines.

Semi-synthetic oil with low-ash additives for clean low-smoke burning

. 'Low-smoke oil' performance class:

JASO-FD,

ISO-L-EGD.

Fuel/oil ratio: 50:1.

Particularly recommended for STIHL 4-MIX engines.

Recommended for STIHL 4-MIX engines

Fully synthetic oil with exceptional lubrication properties.

Burns with extremely low residue due to ash-free additive.

Suitable for continuous use under the most demanding engine conditions

. Performance class:

JASO-FB,

ISO-L-EGB.

Fuel/oil ratio 50:1.

Recommended for STIHL 4-MIX engine

Mineral oil based engine oil.

Especially developed for the demanding needs of power tools.

JASO-FB, ISO-L-EGB.

Oil ratio 1:50.

Designed for Stihl engines.

Semi synthetic "low smoke oil".

Designed for Stihl engines.

Outstanding start capabilities.

Low smoke burning.

JASO-FD, ISO-L-EGD.

Fuel Ratio 1:50.

Based on high quality mineral oils.

Reliable lubrication, no resinification, even during prolonged downtimes.

Based on high quality mineral oils.

Reliable lubrication, no resinification, even during prolonged downtimes.

Fuel additive for petrol engines.

For easier starting and longer engine life.

Specially formulated for air-cooled engines. 

A mineral oil based compressor fluid possessing excellent thermal and oxidative stability. It is manufactured using carefully selected mineral oils and inhibitors are added to control oxidation, a problem encountered in the high temperature areas of the discharge zones, and anti-wear additives protect all the mechanical parts in the compressor. It is designed for a minimum 2000 hour service life assuming excessive temperatures are not encountered.

For high performance engines.

Can be used with leaded & unleaded fuels

 Low emissions, Low deposit, reduced wear and clean burning

Mineral based oil ,suits most four stroke air cooled engines